TS5A3357DCUTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS5A3357 |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 6.5 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 334MHz |
| Turn-Off Delay Time | 3.7 ns |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 3:1 |
| Off-state Isolation-Nom | 81 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 4.5pF 10.5pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP3T |
| Switch Time (Ton, Toff) (Max) | 6.5ns, 3.7ns |
| Charge Injection | 3.4pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -62dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 0.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TS5A3357DCUTG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 3:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. A total of 8 terminations have been recorded. A high-quality output is provided by the electrical component's 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SP3T switching circuits. Try searching with TS5A3357 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. Please refer to the datasheets for 8 pins functions. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 1.65V. This digital switch can be operated with a current of 1μA. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. It is possible to operate 1 inputs. There are 334MHz bandwidths for data transfer. There are 3 outputs on the analogue multiplexer.
TS5A3357DCUTG4 Features
3 Channels
Switch Circuit: SP3T
1μA Supply Current
Bandwidth: 334MHz
TS5A3357DCUTG4 Applications
There are a lot of Texas Instruments TS5A3357DCUTG4 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Intelligent PBX
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PDAs
- Audio/video switches
- Signal routing between systems
- Residential Gateways, Home Gateway/Router
- Communication systems
- Digital Cross-Connects
- Multi-Line E1 Interface Cards
