TS5A3357QDCURQ1

10ns, 6.5ns SP3T 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3357 8 Pins 200nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3357QDCURQ1
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 616
Description: 10ns, 6.5ns SP3T 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3357 8 Pins 200nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	15Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TS5A3357
Pin Count	8
Number of Outputs	3
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	10μA
Turn On Delay Time	10 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	334MHz
Turn-Off Delay Time	6.5 ns
On-State Resistance (Max)	15Ohm
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	4.5pF 10.5pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	10ns, 6.5ns
Charge Injection	3.4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-62dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	40ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3357QDCURQ1 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 3:1. Increasing operating temperature to around -40°C~125°C TA. A total of 8 terminations have been recorded. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A total of 8 pins are injected into the body of the electronic part. These analog multiplexers are built based on SP3T switching circuits. Look for analog switch ic variants by searching with TS5A3357. Internally, this switch multiplexer has a resistance of 15Ohm. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. When the digital multiplexer is charged above 10μA, damage can occur. In order to operate the 1 inputs, there are several steps to follow. The transfer of data can be performed over 334MHz bandwidths. There are 3 outputs on the analogue multiplexer. From the Automotive, AEC-Q100 series.