TS5A3359DCUT

21ns, 10.5ns SP3T 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3359DCUT
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 485
Description: 21ns, 10.5ns SP3T 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	900mOhm
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3359
Pin Count	8
Number of Outputs	3
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	16nA
Nominal Supply Current	16nA
Max Supply Current	50nA
Turn On Delay Time	23.5 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	13 ns
-3db Bandwidth	75MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF 54pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	21ns, 10.5ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω

TS5A3359DCUT Overview

As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 3:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 8. As a result of its 3 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An electrical component like this is included in the 8 series. Based on SP3T switching circuits, these analog multiplexers work. Try searching with TS5A3359 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 900mOhm. For functions related to 8 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The switch device would be able to operate with 16nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 50nA. The 1 inputs need to be operated in order to work. It is possible to transfer data over a 100MHz-bandwidth. There is 900mOhm resistance between Drain and Source for this electronic part. This digital multiplexer has 3 outputs.