TS5A3359DCUTG4

21ns, 10.5ns SP3T 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3359DCUTG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 869
Description: 21ns, 10.5ns SP3T 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	900mOhm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3359
Pin Count	8
Number of Outputs	3
Polarity	Non-Inverting
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	16nA
Nominal Supply Current	16nA
Max Supply Current	50nA
Turn On Delay Time	23.5 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	12 ns
-3db Bandwidth	75MHz
On-State Resistance (Max)	900mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF 54pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	21ns, 10.5ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount

TS5A3359DCUTG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 3:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. This electronic part offers high-quality output due to its 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. A SP3T switching circuit is used for these analog switches. Using the TS5A3359 search parameter, you can discover variants of the switch. It has an internal resistance of 900mOhm. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 16nA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 50nA. The 1 inputs need to be operated in order to work. The transfer of data can be performed over 100MHz bandwidths. 3 outputs are included in the analogue multiplexer.