TS5A3359YZPR

21ns, 10.5ns SP3T 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3359YZPR
Package: 8-XFBGA, DSBGA
Datasheet: PDF
Stock: 889
Description: 21ns, 10.5ns SP3T 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3359 8 Pins 20nA 1.8V 8-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3359
Pin Count	8
Number of Outputs	3
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	16nA
Nominal Supply Current	16nA
Max Supply Current	50nA
Turn On Delay Time	23.5 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	12 ns
-3db Bandwidth	75MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF 54pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	21ns, 10.5ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3359YZPR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. Around -40°C~85°C TA is the extended operating temperature. A total of 8 terminations have been recorded. The electronic part delivers high-quality output through its 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Multiplexers built on a SP3T switching circuit are built. Look for analog switch ic variants by searching with TS5A3359. A 900mOhm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. 1.65V should be the lowest voltage fed to the electronic component. An operating current of 16nA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 50nA on the multiplexer to cause damage. The 1 inputs need to be operated in order to work. This switch operates within the bandwidth of 100MHz. Multiplexer ics with 3 outputs are available.