TS5A4594DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TS5A4594 |
| Pin Count | 5 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 17 ns |
| Supply Type | Single |
| Bandwidth | 450MHz |
| Turn-Off Delay Time | 14 ns |
| On-State Resistance (Max) | 8Ohm |
| High Level Output Current | 40mA |
| Low Level Output Current | 40mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF 6.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 17ns, 14ns |
| Charge Injection | 2pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Drain to Source Resistance | 8Ohm |
| Normal Position | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A4594DCKR Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 5 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. 5 pins are injected to the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Use TS5A4594 to search for variants of the digital switches. As far as internal resistance is concerned, it has 8Ohm. The datasheets for the 5 pins explain the functions. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 10nA current would suffice. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 250nA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 450MHz bandwidths. Drain to Source resistance for this electronic component is 8Ohm.
TS5A4594DCKR Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 450MHz
Drain-to-Source resistance: 8Ohm
TS5A4594DCKR Applications
There are a lot of Texas Instruments TS5A4594DCKR Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Video switching
- PDH Multiplexers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Digital access cross connects
- High reliability control systems
- Access Concentrators
- Power routing
- MP3 players
- DVD-R
