TS5A4594DCKRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Package / Case | SOT-70-5 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| Off-state Isolation-Nom | 82 dB |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TS5A4594DCKRE4 Overview
Due to its SOT-70-5 packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape and Reel is used. The total number of terminations is 5. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. An injection of 5 pins is performed into the body of the electrical component. The internal resistance of this digital multiplexer is 8Ohm. To find out what the 5 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. It would be sufficient to run this analogue multiplexer with 10nA current. If you put voltage higher than 250nA on the digital multiplexer, damage may occur. An environment with a temperature greater than 85°C should not be used to operate the digital switches. A analog switch ics with 1 outputs is included.
TS5A4594DCKRE4 Features
1 Channels
10nA Supply Current
TS5A4594DCKRE4 Applications
There are a lot of Texas Instruments TS5A4594DCKRE4 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Sample-and-hold systems
- Private Branch Exchange (PBX)
- Wireless Local Loop
- Video switching
- E1 Network Equipment
- Isolation
- Industrial and process control systems
- Cell phones
- Microprocessor controlled systems
