TS5A4595DCKRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOT-70-5 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Output | COMMON OUTPUT |
| Pin Count | 5 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| Off-state Isolation-Nom | 82 dB |
| On-state Resistance Match-Nom | 16Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TS5A4595DCKRE4 Overview
Packed in SOT-70-5, the electronic component is convenient for shipping overseas. In total, there are 5 terminations. By its 1 channels, the electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 5 pins. A 8Ohm internal resistance characterizes this multiplexer. To find out what the functions of 5 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. There should be 2V voltage fed to the electrical part below 2V. The switch device would be able to operate with 10nA current. It may damage the digital multiplexer if the voltage is higher than 250nA. The analog switch ic utilizes COMMON OUTPUT outputs in total. In an environment with a temperature higher than 85°C, the digital switches should not operate.
TS5A4595DCKRE4 Features
1 Channels
10nA Supply Current
TS5A4595DCKRE4 Applications
There are a lot of Texas Instruments TS5A4595DCKRE4 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Audio and video signal routing
- PBX interfaces
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Residential Gateways, Home Gateway/Router
- Industrial control systems
- T1/E1 Terminals
- Access Concentrators
- Microprocessor controlled systems
- FTTH
