TS5A4596DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TS5A4596 |
| Output | COMMON OUTPUT |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 17 ns |
| Supply Type | Single |
| Bandwidth | 450MHz |
| Turn-Off Delay Time | 14 ns |
| On-State Resistance (Max) | 8Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF 6.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 17ns, 14ns |
| Charge Injection | 2pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A4596DBVR Overview
Shipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 5. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. An injection of 5 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for TS5A4596 variants of the analog switch ic. In this multiplexer, the internal resistance is 8Ohm. To find out what the functions of 5 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 10nA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. It may damage the digital multiplexer if the voltage is higher than 250nA. The digital multiplexer has COMMON OUTPUT outputs that can be used. There are various bandwidths available for data transfer.
TS5A4596DBVR Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 450MHz
TS5A4596DBVR Applications
There are a lot of Texas Instruments TS5A4596DBVR Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Cross Connects
- Relay Replacement
- Routers
- RGB switches
- Medical systems
- PBX interfaces
- Audio and video switching
- Sample-and-hold systems
- Microwave transmission systems
