TS5A4624DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A4624 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Max Supply Current | 50nA |
| Turn On Delay Time | 22 ns |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 8 ns |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 63 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 22ns, 8ns |
| Charge Injection | 15.5pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -63dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 700mOhm |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A4624DCKR Overview
Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. 6 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component like this is included in the 6 series. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with TS5A4624. Internally, this switch multiplexer has a resistance of 900mOhm. To find out what the 6 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 10nA. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. When the digital multiplexer is charged above 50nA, damage can occur. 100MHz bandwidths enable data to be transferred. The analog switch ics has 2 outputs.
TS5A4624DCKR Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 90MHz
Bandwidth: 100MHz
TS5A4624DCKR Applications
There are a lot of Texas Instruments TS5A4624DCKR Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Signal routing between systems
- Automatic test equipment
- Imaging
- Audio and video routing
- Medical Instrumentation
- HDTV
- Audio/video switches
- Cell phones
- Routers
