TS5A63157DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TS5A63157 |
| Output | SEPARATE OUTPUT |
| Pin Count | 6 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Turn On Delay Time | 5.5 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 370MHz |
| Turn-Off Delay Time | 3.8 ns |
| -3db Bandwidth | 371MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 30nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5ns, 3.4ns |
| Charge Injection | -21pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -61dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A63157DBVRG4 Overview
Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. High-quality output is provided by the electronic component's 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. Multiplexers built on a SPDT switching circuit are built. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with TS5A63157. It has an internal resistance of 10Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Single supply type analogue multiplexer. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 10nA current would suffice. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. Putting voltage greater than 100nA on the multiplexer may cause damage. This analog switch ic utilizes SEPARATE OUTPUT output. Operating the 2 inputs requires 2 inputs. 370MHz-bandwidths can be used to transfer data between multiplexers.
TS5A63157DBVRG4 Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 371MHz
Bandwidth: 370MHz
TS5A63157DBVRG4 Applications
There are a lot of Texas Instruments TS5A63157DBVRG4 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Sample hold systems
- Industrial control systems
- 65 V DACs
- High-Voltage
- PDAs
- E1 Network Equipment
- Optical Applications
- Battery-powered systems
- PBX interfaces
