TS5A6542YZPR

25ns, 20ns SPDT 750mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A6542 8 Pins 20nA 2.5V 8-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A6542YZPR
Package: 8-XFBGA, DSBGA
Datasheet: PDF
Stock: 464
Description: 25ns, 20ns SPDT 750mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A6542 8 Pins 20nA 2.5V 8-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	750mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	TS5A6542
Pin Count	8
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.25V
Operating Supply Current	5.5nA
Nominal Supply Current	55nA
Max Supply Current	100nA
Turn On Delay Time	30 ns
Input Voltage (Max)	6.5V
Number of Inputs	1
Supply Type	Single
Bandwidth	43MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	750mOhm
High Level Output Current	450mA
Low Level Output Current	450mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	37pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	25ns, 20ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-63dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	40ns
Voltage - Supply, Single (V+)	2.25V~5.5V
Drain to Source Resistance	800mOhm
Normal Position	NO
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A6542YZPR Overview

Shipping overseas is convenient with the electronic component packed in 8-XFBGA, DSBGA. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. It is part of the design of the 8 series that this electronic component is included. Multiplexers built on a SPDT switching circuit are built. Look for analog switch ic variants by searching with TS5A6542. As far as internal resistance is concerned, it has 750mOhm. The functions of 8 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.25V. This multiplexer would work with 5.5nA current. A voltage of 2.25V~5.5V is required to drain this analog switch from a single voltage supply. Put voltage above 100nA on the multiplexer to cause damage. The electrical component supports 1 inputs. This switch operates within the bandwidth of 43MHz. It has a Drain to Source resistance of 800mOhm ohms. The analog switch ics includes 2 outputs.