banner_page

TS5N118PWE4

16 Terminations4.75V~5.25V 16 Pin TS5N118 Signal switch1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TS5N118PWE4
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 752
  • Description: 16 Terminations4.75V~5.25V 16 Pin TS5N118 Signal switch1 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer/Demultiplexer
Resistance 12.5Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TS5N118
Pin Count 16
Operating Supply Voltage 5V
Circuit 1 x 8:1
Number of Channels 1
Nominal Supply Current 10mA
Propagation Delay 100 ps
Turn On Delay Time 200 ns
Number of Inputs 8
Supply Type Single
Turn-Off Delay Time 200 ns
Off-state Isolation-Nom 50 dB
Voltage Supply Source Single Supply
Independent Circuits 1
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

TS5N118PWE4 Overview


Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.75V~5.25V, designers have greater flexibility of digital controlled switch.Among its basic configurations are 16 terminations.The base part number is TS5N118, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.It has 8 inputs.A resistance of 12.5Ohm is used to operate it.This turn signal switch's circuit uses 1 transmission channels.

TS5N118PWE4 Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

TS5N118PWE4 Applications


There are a lot of Texas Instruments TS5N118PWE4 Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor memory systems
  • Communication system
  • Steel plants
  • Speed synchronization of multiple motors in industries
  • Data bus control
  • Enabling different functions units in microprocessor instruction decoding
  • Data collection system
  • PCIe
  • Frequency multiplexing system
  • Seven segment displays

Write a review

Note: HTML is not translated!
    Bad           Good