Parameters |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.64mm |
Base Part Number |
TS5N214 |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Circuit |
2 x 1:4 |
Number of Channels |
2 |
Nominal Supply Current |
10mA |
Propagation Delay |
3 ns |
Turn On Delay Time |
200 ns |
Supply Type |
Single |
Bandwidth |
25MHz |
Turn-Off Delay Time |
200 ns |
High Level Output Current |
100mA |
Low Level Output Current |
100mA |
Off-state Isolation-Nom |
50 dB |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
74.502547mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
3Ohm |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
TS5N214DBQR Overview
In order to save board space, digital switch is located in the 16-SSOP (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.75V~5.25V, designers have superior flexibility.Among its basic configurations are 16 terminations.As its base part number is TS5N214, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch contains 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.In order for the turn signal switch to work, there are 8 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.With a resistance of 3Ohm, it operates.This turn signal switch's circuit is based on a circuit with 2 channels.
TS5N214DBQR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
TS5N214DBQR Applications
There are a lot of Texas Instruments TS5N214DBQR Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Medical industry
- Data communication
- Analog, digital or video signal switching
- Code converters
- Frequency multiplexing system
- Seven segment displays
- PCIe
- Communication system
- GLAN