TS5N214PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 3Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS5N214 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 1:4 |
| Number of Channels | 2 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 200 ns |
| Supply Type | Single |
| Bandwidth | 25MHz |
| Turn-Off Delay Time | 200 ns |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5N214PWR Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.75V~5.25V, designers are provided with a greater degree of flexibility.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of TS5N214 may also be used.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 16 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.Currently, it is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The turn signal switch operates with 8 outputs.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The resistance of the signal switching is 3Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.
TS5N214PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
TS5N214PWR Applications
There are a lot of Texas Instruments TS5N214PWR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Solenoid cooling fan
- Logic circuits
- A robotic vehicle with the metal detector
- Electronically controlled engine system
- Data communication
- High-performance memory systems
- HDMI applications
- Memory chips
- Frequency multiplexing system
