TS5N412DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Resistance | 12.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS5N412 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Number of Bits | 8 |
| Propagation Delay | 3 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 25MHz |
| Supply Current-Max (Isup) | 0.003mA |
| -3db Bandwidth | 25MHz Min |
| On-State Resistance (Max) | 12.5Ohm |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 200ns |
| Number of Output Lines | 2 |
| Crosstalk | -50dB @ 25MHz |
| Voltage - Supply, Single (V+) | 4.75V~5.25V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5N412DBQR Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. A SPDT switching circuit is used for these analog switches. Circuits number 4 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with TS5N412. In this multiplexer, the internal resistance is 12.5Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.25V. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 4.75V. In order to operate this switch device, it would need a current of 10mA. A voltage of 4.75V~5.25V is required for this switch device, which drains from a single voltage source. Operating voltages range from 5V. There are 25MHz bandwidths for data transfer. It can conduct 8-bit signals.
TS5N412DBQR Features
4 Channels
Switch Circuit: SPDT
10mA Supply Current
-3db Bandwidth: 25MHz Min
Bandwidth: 25MHz
8-Bit
TS5N412DBQR Applications
There are a lot of Texas Instruments TS5N412DBQR Analog Switches & Multiplexers ICs applications.
- Routers
- Automotive applications
- PCMCIA cards
- ATM
- Central office
- Fault Tolerant Systems
- Video switching
- SDH
- Microprocessor controlled systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
