TS5N412PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 12.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS5N412 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 25MHz |
| Supply Current-Max (Isup) | 0.003mA |
| -3db Bandwidth | 25MHz Min |
| On-State Resistance (Max) | 12.5Ohm |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 200ns |
| Independent Circuits | 1 |
| Crosstalk | -50dB @ 25MHz |
| Voltage - Supply, Single (V+) | 4.75V~5.25V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5N412PW Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 4 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Based on SPDT switching circuits, these analog multiplexers work. It consists of 4 circuits. Using the TS5N412 search parameter, you can discover variants of the switch. A 12.5Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. Users should never supply a voltage higher than 5.25V to a switch device. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 4.75V. This digital switch can be operated with a current of 10mA. This analogue multiplexer requires a voltage of 4.75V~5.25V when it drains from a single voltage supply. Operating voltages range from 5V. Among the inputs that can be operated are the 8 inputs. 25MHz bandwidths enable data to be transferred. Multiplexer ics with 4 outputs are available.
TS5N412PW Features
4 Channels
Switch Circuit: SPDT
10mA Supply Current
-3db Bandwidth: 25MHz Min
Bandwidth: 25MHz
TS5N412PW Applications
There are a lot of Texas Instruments TS5N412PW Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Relay replacements
- CSU
- ISDN NT1/TA
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Sample-and-hold systems
- DSLAMs
- Power routing
- Central office
- High reliability control systems
