TS5N412PWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 12.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS5N412 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Number of Bits | 8 |
| Propagation Delay | 3 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 25MHz Min |
| On-State Resistance (Max) | 12.5Ohm |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 200ns |
| Number of Output Lines | 2 |
| Crosstalk | -50dB @ 25MHz |
| Voltage - Supply, Single (V+) | 4.75V~5.25V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5N412PWR Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. It consists of 4 circuits. Use TS5N412 to search for variants of the digital switches. As far as internal resistance is concerned, it has 12.5Ohm. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.25V. A cost-effective Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 4.75V. This digital switch can be operated with a current of 10mA. A voltage of 4.75V~5.25V is required for this switch device, which drains from a single voltage source. There is a voltage range of 5V operating voltages for the electrical part. It is able to conduct in a 8-bit way.
TS5N412PWR Features
4 Channels
Switch Circuit: SPDT
10mA Supply Current
-3db Bandwidth: 25MHz Min
8-Bit
TS5N412PWR Applications
There are a lot of Texas Instruments TS5N412PWR Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Access Concentrators
- SDH
- Transmit
- Fault Tolerant Systems
- Fiber to the Home
- Sample hold systems
- SONET/SDH ADM
- Remote wireless modules
- E1 Multiplexer
