Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS7221 |
Pin Count |
5 |
Output Type |
Open Drain |
Number of Elements |
1 |
Nominal Supply Current |
14mA |
Power Dissipation |
500mW |
Output Current |
30mA |
Max Supply Current |
14mA |
Quiescent Current |
16μA |
Response Time |
2 μs |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~10V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
240dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
300pA |
Input Bias Current |
300pA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
300pA @ 5V |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Length |
2.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
TS7221AILT Overview
For convenience, it is packaged in SC-74A, SOT-753 .A comparator with a Open Drain output is used here.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 5 terminals.Other Comparator like the device play a important role in the industry.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .5 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TS7221 .A quiescent current of 16μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 14mA when using the device.A current supply greater than 14mA may cause the comparator to malfunction.You can input a maximum current of 300pA into this device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 240dB .
TS7221AILT Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS7221AILT Applications
There are a lot of STMicroelectronics TS7221AILT linear comparators applications.
- Mobile Communications
- Infotainment and Clusters
- Infotainment & cluster
- Security Detection Systems
- Body Control Modules
- Zero-Crossing Detectors
- Automatic Test Equipment
- Simple Analog-to-Digital Converters (ADCs)
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics