TS831-5IZ-AP
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Box (TB) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS831 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 12μA |
| Power Dissipation | 625mW |
| Max Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.33V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20μs Typical Response Time |
| Min Reset Threshold Voltage | 4.11V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.33V |
| Undervoltage Threshold | 4.11V |
| Overvoltage Threshold | 4.5V |
TS831-5IZ-AP Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Box (TB) way. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Through Hole. The power management belongs to the Power Management Circuits subcategory. In total, it has 3 pins on IC management. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Through Hole mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a 12μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TS831. A maximum supply temperature of 12μA can be used.
TS831-5IZ-AP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
TS831-5IZ-AP Applications
There are a lot of STMicroelectronics TS831-5IZ-AP Voltage Supervisors applications.
- Microcontroller system
- FPGA design
- Detection of phase imbalance
- Stable power system
- Magnetic resonance imaging
- Power distribution systems of ICU
- Digitally controlled LDO regulators circuit
- Sensitive sensors
- Military communications
- Efficient information transmission
