TS861AID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS861 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 12μA |
| Power Dissipation | 710mW |
| Output Current | 5mA |
| Max Supply Current | 12μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 300pA |
| Input Bias Current | 600pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS861AID Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Push-Pull output is used here.The part is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 1 elements in total.The device includes 8 pins.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search TS861 for more pin-to-pin solutions.The comparator displays a quiescent current of 16μA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 12μA .An excess of current supply over 12μA could result in malfunction of the comparator.A maximum current of 300pA can be supplied to the device.A voltage gain of 240dB can be determined from the voltage formula for the part.
TS861AID Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS861AID Applications
There are a lot of STMicroelectronics TS861AID linear comparators applications.
- General-Purpose Portable Devices
- Analog front end
- Zero-Crossing Detectors
- Window Comparators
- Battery-Powered Electronics
- Hand-Held Electronics
- Infotainment & cluster
- Ultra-Low Power Systems
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
