TS861AIDT
| Parameters | |
|---|---|
| Base Part Number | TS861 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 12μA |
| Power Dissipation | 710mW |
| Output Current | 5mA |
| Max Supply Current | 12μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
TS861AIDT Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Push-Pull .This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical General Purpose comparator.This element consists of 1 elements in total.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.Search TS861 to find more pin-to-pin solutions.The comparator presents a quiescent current of 16μA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 12μA .A current supply greater than 12μA may result in the comparator malfunctioning.A maximum current of 300pA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 240dB .
TS861AIDT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS861AIDT Applications
There are a lot of STMicroelectronics TS861AIDT linear comparators applications.
- System control and monitoring
- Building automation
- Window Comparators, Multivibrators
- DC/DC and AC/DC power supplies
- Hand-Held Electronics
- Portable Battery Monitoring
- Limit Comparators
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Power Supervision
