TS861AILT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS861 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 12μA |
| Power Dissipation | 500mW |
| Output Current | 5mA |
| Max Supply Current | 12μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS861AILT Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .A comparator with an output type of Push-Pull is being used.This package has been designed with Cut Tape (CT) .The comparator has a total of 5 terminals.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.A total of 1 elements can be found in it.A total of 5 pins are included.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 5 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TS861 .There is a quiescent current of 16μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 12μA supply current.A current supply greater than 12μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 300pA current into the device.Based on the voltage formula, the voltage gain of the part is 240dB .
TS861AILT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS861AILT Applications
There are a lot of STMicroelectronics TS861AILT linear comparators applications.
- Hand-Held Electronics
- Power management
- Automatic Test Equipment
- General Purpose Low Voltage Applications
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
- Window Comparators
- Industrial
- System control and monitoring
- General-Purpose Portable Devices
