TS861IDT
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS861 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 12μA |
| Power Dissipation | 710mW |
| Output Current | 5mA |
| Max Supply Current | 12μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
TS861IDT Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Push-Pull is being used.This device is designed in Tape & Reel (TR) case.The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has a pin count of 8 .If you require more pin-to-pin solutions, search TS861 for more options.As a result, this comparator displays a quiescent current of 16μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 12μA .If the current supply exceeds 12μA , the comparator might be damaged.You are allowed to input a maximum current of 300pA into the device.According to the voltage formula, the part has a voltage gain of 240dB .
TS861IDT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS861IDT Applications
There are a lot of STMicroelectronics TS861IDT linear comparators applications.
- Automotive
- Wearable Devices
- Battery management and protection
- Handheld Instruments
- Factory automation & control
- High-Speed Differential Line Receiver
- Security Detection Systems
- Infotainment and Clusters
- Point of load regulators
- General Purpose Low Voltage Applications
