TS861IN
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Max Input Current | 300pA |
| Input Bias Current | 600pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.25W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TS861 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 12μA |
| Output Current | 5mA |
| Max Supply Current | 12μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Output Current per Channel | 5mA |
TS861IN Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.Output type of this comparator is Push-Pull .The chip is packaged with Tube .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.A total of 1 elements can be found in it.A total of 8 pins are included.A Through Hole mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TS861 .As a result, this comparator displays a quiescent current of 16μA .The PCB or other board can be mounted using the Through Hole on it.Normally, the nominal supply current should be 12μA .Current supply exceeding 12μA could cause disfunction of the compartator.A maximum current of 300pA can be supplied to the device.The voltage gain of the part is indicated by 240dB in the voltage formula.
TS861IN Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS861IN Applications
There are a lot of STMicroelectronics TS861IN linear comparators applications.
- Window Comparators, Multivibrators
- Infotainment & cluster
- Self-diagnostics
- Wireless Base Stations
- System control and monitoring
- Set Top Boxes
- Notebooks and PDAs
- Industrial
- Zero-Crossing Detectors
- Automatic Test Equipment
