TS862AID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS862 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 28μA |
| Power Dissipation | 710mW |
| Max Supply Current | 28μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS862AID Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Push-Pull output.As a result, it is designed with Tube package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .The total number of elements is 2 .The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TS862 .A quiescent current of 16μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 28μA .If the current supply exceeds 28μA , the comparator might be damaged.In accordance with the voltage formula, the part's voltage gain is 240dB .
TS862AID Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS862AID Applications
There are a lot of STMicroelectronics TS862AID linear comparators applications.
- Wearable Devices
- Motor drives
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- System control and monitoring
- Infotainment & cluster
- Self-diagnostics
- Mobile Communications
- Factory automation & control
