TS862AIDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS862 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 28μA |
| Power Dissipation | 710mW |
| Max Supply Current | 28μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS862AIDT Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator has a total of 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 8 .Search TS862 to find more pin-to-pin solutions.There is a quiescent current of 16μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 28μA .A supply current exceeding 28μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 300pA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 240dB .
TS862AIDT Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS862AIDT Applications
There are a lot of STMicroelectronics TS862AIDT linear comparators applications.
- Point of load regulators
- Window Comparators
- Window Comparators
- Automatic Test Equipment
- Wearable Devices
- General-Purpose Portable Devices
- Analog front end
- DC/DC and AC/DC power supplies
- Handheld Instruments
- Window Comparators, Multivibrators
