Parameters |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
625mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
10 |
Base Part Number |
TS862 |
Pin Count |
8 |
Output Type |
Push-Pull |
Number of Elements |
2 |
Nominal Supply Current |
28μA |
Power Dissipation |
625mW |
Max Supply Current |
28μA |
Propagation Delay |
2 μs |
Quiescent Current |
16μA |
Response Time |
2000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~10V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
240dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
300pA |
Input Bias Current |
300pA |
Current - Quiescent (Max) |
16μA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
300pA @ 5V |
CMRR, PSRR (Typ) |
70dB CMRR |
Height |
1.05mm |
Length |
6.6mm |
Width |
3.1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
NRND (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
TS862AIPT Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.There is a Push-Pull output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.There are 8 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 2 elements in total.There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TS862 .There is 16μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 28μA when using the device.A current supply greater than 28μA may result in the comparator malfunctioning.Input current to the device is limited to 300pA .The voltage gain of the part is indicated by 240dB in the voltage formula.
TS862AIPT Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS862AIPT Applications
There are a lot of STMicroelectronics TS862AIPT linear comparators applications.
- Factory automation & control
- Industrial
- Wide Range VCO; MOS Clock Timers
- General-Purpose Portable Devices
- Infotainment and Clusters
- Body Control Modules
- Set Top Boxes
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Appliances