TS862IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Max Power Dissipation | 625mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | TS862 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 28μA |
| Power Dissipation | 625mW |
| Max Supply Current | 28μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Length | 4.4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS862IPT Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.A comparator with a Push-Pull output is used here.This chip is designed with the Tape & Reel (TR) package.The device is designed with 8 terminations.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.Electronic comparator includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You may wish to search TS862 for more solutions that address your specific needs.There is a quiescent current of 16μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 28μA .If the current supply exceeds 28μA , the comparator might be damaged.Input current to the device is limited to 300pA .In accordance with the voltage formula, the part's voltage gain is 240dB .
TS862IPT Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS862IPT Applications
There are a lot of STMicroelectronics TS862IPT linear comparators applications.
- DC/DC and AC/DC power supplies
- Window Comparators
- Set Top Boxes
- High-Speed Differential Line Receiver
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Battery-Powered Electronics
- Appliances
- Zero-Crossing Detectors
- Lithium ion battery monitoring
