TS864AID
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS864 |
| Pin Count | 14 |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 2.7/10V |
| Nominal Supply Current | 56μA |
| Power Dissipation | 830mW |
| Max Supply Current | 56μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 12V |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
TS864AID Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of Push-Pull .The part is shipped by Tube .The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 4 elements.Electronic comparator includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 14 pins.In order to find a solution that meets your specific needs, search TS864 for more pin-to-pin solutions.The comparator presents a quiescent current of 16μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 56μA .The compartator could be damaged if the current supply exceeds 56μA .A power supply of 2.7/10V is sufficient for the operation of the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 240dB .
TS864AID Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS864AID Applications
There are a lot of STMicroelectronics TS864AID linear comparators applications.
- Hand-Held Electronics
- Analog front end
- Window Comparators
- Body Control Modules
- Notebooks and PDAs
- DC/DC and AC/DC power supplies
- Building automation
- Laptop Computers
- Ultra-Low Power Systems
- Self-diagnostics
