TS864AIN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.56W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS864 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 2.7/10V |
| Nominal Supply Current | 56μA |
| Max Supply Current | 56μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Supply Voltage Limit-Max | 12V |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS864AIN Overview
A convenient packaging is provided in the form of 14-DIP (0.300, 7.62mm) .A comparator with an output type of Push-Pull is being used.As a result, it is designed with Tube package.14 terminals are found on the comparator.Other Comparator like the device play a important role in the industry.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .The total number of elements is 4 .The device contains 14 pins.Electronic comparator is recommended to mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TS864 .There is a quiescent current of 16μA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 56μA .The compartator could be damaged if the current supply exceeds 56μA .The device can be run with 2.7/10V power supplies.The maximal current your can input into the device is 300pA .
TS864AIN Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
TS864AIN Applications
There are a lot of STMicroelectronics TS864AIN linear comparators applications.
- Infotainment and Clusters
- System control and monitoring
- Point of load regulators
- Portable and Battery-Powered Systems
- Laptop Computers
- Mobile Phones and Tablets
- Window Comparators
- Factory automation & control
- Current and voltage sensing
- Power management
