TS864ID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS864 |
| Pin Count | 14 |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 2.7/10V |
| Nominal Supply Current | 56μA |
| Power Dissipation | 830mW |
| Max Supply Current | 56μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 12V |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS864ID Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a Push-Pull output is used here.As a result, it is designed with Tube package.There are 14 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .This element consists of 4 elements in total.The device contains 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 14 pins on the comparator.Alternatively, you may search for TS864 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 16μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 56μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 56μA .2.7/10V power supplies are enough to run the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 240dB .
TS864ID Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS864ID Applications
There are a lot of STMicroelectronics TS864ID linear comparators applications.
- Zero-Crossing Detectors
- Wide Range VCO; MOS Clock Timers
- Laptop Computers
- Window Comparators
- Window Comparators
- DC/DC and AC/DC power supplies
- Body Control Modules
- Power Supervision
- Current and voltage sensing
- High-Speed Differential Line Receiver
