Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
830mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS864 |
Pin Count |
14 |
Output Type |
Push-Pull |
Number of Elements |
4 |
Power Supplies |
2.7/10V |
Nominal Supply Current |
56μA |
Power Dissipation |
830mW |
Max Supply Current |
56μA |
Propagation Delay |
2 μs |
Quiescent Current |
16μA |
Response Time |
2000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~10V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
240dB |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Supply Voltage Limit-Max |
12V |
Max Input Current |
300pA |
Input Bias Current |
300pA |
Current - Quiescent (Max) |
16μA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
300pA @ 5V |
CMRR, PSRR (Typ) |
70dB CMRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
TS864IDT Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type of this comparator is Push-Pull .This device is designed in Tape & Reel (TR) case.You can find 14 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.A comparator of this type is typically of type General Purpose .In total, it contains 4 elements.The device contains 14 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has a pin count of 14 .If you require more pin-to-pin solutions, search TS864 for more options.There is 16μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 56μA .If the current supply exceeds 56μA , the comparator might be damaged.A power supply of 2.7/10V is sufficient for the operation of the device.Input current to the device cannot exceed 300pA .The voltage gain of the part is indicated by 240dB in the voltage formula.
TS864IDT Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS864IDT Applications
There are a lot of STMicroelectronics TS864IDT linear comparators applications.
- Factory automation & control
- Battery management and protection
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- RC Timers
- Window Comparators, Multivibrators
- Laptop Computers
- Mobile Phones and Tablets
- High-Speed Differential Line Receiver