TS864IN
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Supply Voltage Limit-Max | 12V |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.56W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS864 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 2.7/10V |
| Nominal Supply Current | 56μA |
| Max Supply Current | 56μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
TS864IN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) in order to facilitate transportation.There is a Push-Pull output type for this comparator.The chip is packaged with Tube .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .This element consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting method is Through Hole .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TS864 .As a result, this comparator displays a quiescent current of 16μA .Mounting on PCBs or other boards is easy with the Through Hole .Electronic comparator is recommended that the nominal supply current for the device be set to 56μA .A current supply greater than 56μA may result in the comparator malfunctioning.The device can be run with 2.7/10V power supplies.You are allowed to input a maximum current of 300pA into the device.
TS864IN Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
TS864IN Applications
There are a lot of STMicroelectronics TS864IN linear comparators applications.
- Metering Systems
- High-Speed Sampling Circuits
- Self-diagnostics
- Wireless Base Stations
- Wide Range VCO; MOS Clock Timers
- Pulse, Squarewave, and Time Delay Generators
- High-Speed Differential Line Receiver
- Security Detection Systems
- Current and voltage sensing
- Mobile Phones and Tablets
