banner_page

TS864IPT

Surface Mount Tape & Reel (TR) 2000 ns μs Linear Comparators 240dB dB 300pA pA 56μA μA 15mV mV Surface Mount


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-TS864IPT
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 566
  • Description: Surface Mount Tape & Reel (TR) 2000 ns μs Linear Comparators 240dB dB 300pA pA 56μA μA 15mV mV Surface Mount (Kg)

Details

Tags

Parameters
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 2.7V~10V
Input Offset Voltage (Vos) 15mV
Voltage Gain 240dB
Average Bias Current-Max (IIB) 0.0006μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 12V
Max Input Current 300pA
Input Bias Current 300pA
Current - Quiescent (Max) 16μA
Voltage - Input Offset (Max) 15mV @ 5V
Current - Input Bias (Max) 300pA @ 5V
CMRR, PSRR (Typ) 70dB CMRR
Natural Thermal Resistance 250 °C/W
Height Seated (Max) 1.2mm
Length 5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Max Power Dissipation 710mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TS864
Pin Count 14
Output Type Push-Pull
Number of Elements 4
Power Supplies 2.7/10V
Nominal Supply Current 56μA
Power Dissipation 710mW
Max Supply Current 56μA
Propagation Delay 2 μs
Quiescent Current 16μA
Response Time 2000 ns

TS864IPT Overview


A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .There is a Push-Pull output type for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 4 elements in total.The device is equipped with 14 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TS864 .This comparator presents a quiescent current of 16μA .The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 56μA .An excess of current supply over 56μA could result in malfunction of the comparator.A power supply of 2.7/10V is sufficient for the operation of the device.Input current to the device is limited to 300pA .In accordance with the voltage formula, the part's voltage gain is 240dB .

TS864IPT Features


Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB

TS864IPT Applications


There are a lot of STMicroelectronics TS864IPT linear comparators applications.

  • Multivibrators and High-Voltage Digital Logic Gates
  • Pulse, Squarewave, and Time Delay Generators
  • Battery-Powered Electronics
  • Zero-Crossing Detectors
  • Portable and Battery-Powered Systems
  • Zero-Crossing Detectors
  • Alarm and Monitoring Circuits
  • Window Comparators
  • General Purpose Low Voltage Applications
  • Wearable Devices

Write a review

Note: HTML is not translated!
    Bad           Good