banner_page

TS882IQ2T

Surface Mount Tape & Reel (TR) 5500 ns μs Linear Comparators 10pA pA 450nA μA 6mV mV Surface Mount


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-TS882IQ2T
  • Package: 8-UFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 270
  • Description: Surface Mount Tape & Reel (TR) 5500 ns μs Linear Comparators 10pA pA 450nA μA 6mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-UFDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Terminal Position DUAL
Number of Functions 2
Supply Voltage 1.2V
Terminal Pitch 0.5mm
Base Part Number TS882
Output Type Push-Pull
Number of Elements 2
Nominal Supply Current 450nA
Max Supply Current 450nA
Propagation Delay 16 μs
Quiescent Current 500nA
Response Time 5500 ns
Common Mode Rejection Ratio 78 dB
Voltage - Supply, Single/Dual (±) 1.1V~5.5V
Input Offset Voltage (Vos) 6mV
Average Bias Current-Max (IIB) 0.000099μA
Power Supply Rejection Ratio (PSRR) 78dB
Supply Voltage Limit-Max 6V
Bias Current-Max (IIB) @25C 0.00001μA
Max Input Current 10pA
Input Bias Current 10pA
Current - Quiescent (Max) 500nA
Voltage - Input Offset (Max) 6mV @ 5V
Hysteresis 4.2mV
CMRR, PSRR (Typ) 78dB CMRR
Height 550μm
Length 2.15mm
Width 2.15mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

TS882IQ2T Overview


The product is packaged in 8-UFDFN Exposed Pad for ease of transportation.A comparator with a Push-Pull output is used here.This package has been designed with Tape & Reel (TR) .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 1.2V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .This is a 2 element comparator.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.Alternatively, you may search for TS882 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 500nA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 450nA .Current supply exceeding 450nA could cause disfunction of the compartator.Input current to the device is limited to 10pA .

TS882IQ2T Features


Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 500nA

TS882IQ2T Applications


There are a lot of STMicroelectronics TS882IQ2T linear comparators applications.

  • Set Top Boxes
  • Building automation
  • Multivibrators and High-Voltage Digital Logic Gates
  • Battery management and protection
  • Consumer Medical Electronics
  • Notebooks and PDAs
  • Handheld Instruments
  • Battery-Powered Electronics
  • Point of load regulators
  • RC Timers

Write a review

Note: HTML is not translated!
    Bad           Good