Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TS9001-1 |
Output Type |
Push-Pull |
Operating Supply Voltage |
5.5V |
Number of Elements |
1 |
Nominal Supply Current |
600nA |
Power Dissipation |
200mW |
Output Current |
50mA |
Propagation Delay |
50 μs |
Quiescent Current |
1.3μA |
Response Time |
5000 ns |
Common Mode Rejection Ratio |
60 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Power Supply Rejection Ratio (PSRR) |
60dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1nA |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
1.3μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
1nA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
60dB PSRR |
Height |
925μm |
Length |
2.2mm |
Width |
1.35mm |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TS9001-1IJ5T Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .A comparator with an output type of Push-Pull is being used.This package has been designed with Tape & Reel (TR) .The comparator has 5 terminals.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 1 elements in total.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.Alternatively, you may search for TS9001-1 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 1.3μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 600nA supply current.Electronic comparator is possible to input a maximum of 1nA current into the device.Normal operation requires 5.5V operating supply voltage.
TS9001-1IJ5T Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.3μA
TS9001-1IJ5T Applications
There are a lot of Silicon Labs TS9001-1IJ5T linear comparators applications.
- Portable and Battery-Powered Systems
- Motor drives
- Self-diagnostics
- Point of load regulators
- Battery management and protection
- Metering Systems
- System control and monitoring
- Hand-Held Electronics
- Notebooks and PDAs
- Limit Comparators