Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
NanoWatt Analog™ |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TS9002 |
Output Type |
CMOS, Complementary, TTL |
Operating Supply Voltage |
11V |
Number of Elements |
2 |
Nominal Supply Current |
2.6μA |
Output Current |
40mA |
Propagation Delay |
7 μs |
Quiescent Current |
4μA |
Response Time |
17000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~11V ±1.25V~5.5V |
Input Offset Voltage (Vos) |
3.5mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
10pA |
Dual Supply Voltage |
5.5V |
Input Bias Current |
10pA |
Current - Quiescent (Max) |
4μA |
Voltage - Input Offset (Max) |
3.5mV @ 2.5V |
Current - Input Bias (Max) |
10pA @ 2.5V |
Hysteresis |
50mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
TS9002IM8T Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type CMOS, Complementary, TTL output.As a result, it is designed with Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a 3V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.This element consists of 2 elements in total.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You can search TS9002 if you are looking for more pin-to-pin solutions.A quiescent current of 4μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 2.6μA in order to use the device normally.The maximal current your can input into the device is 10pA .Comparator electronics is part of the NanoWatt Analog? comparator series.For normal operation, there should be 11V operating supply voltage applied.
TS9002IM8T Features
CMOS, Complementary, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4μA
TS9002IM8T Applications
There are a lot of Silicon Labs TS9002IM8T linear comparators applications.
- Metering Systems
- Self-diagnostics
- Threshold Detectors
- Battery management and protection
- Notebooks and PDAs
- Power Supervision
- Motor drives
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Set Top Boxes