TS912AIDT

2 Channels 75mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS912 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TS912AIDT
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 400
Description: 2 Channels 75mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS912 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	4.535924g
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	TS912
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Power Supplies	3/10V
Number of Channels	2
Operating Supply Current	400μA
Nominal Supply Current	700μA
Output Current	40mA
Slew Rate	1.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	75mA
Input Offset Voltage (Vos)	5mV
Bandwidth	1.4MHz
Unity Gain BW-Nom	800 kHz
Voltage Gain	92.04dB
Average Bias Current-Max (IIB)	0.0003μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00015μA
Dual Supply Voltage	5V
Height	1.25mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS912AIDT Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 400μA , this buffer op amp will be able to operate. Voltage gain should remain at 92.04dB. On the buffer amps, there are 2 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. It is used TAPE AND REEL to pack the op amps.