TS912ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS912 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Power Supplies | 3/10V |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Nominal Supply Current | 700μA |
| Output Current | 40mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Dual Supply Voltage | 5V |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS912ID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Op amp ic rates 10mV for input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 400μA and 10 . Voltage gain should remain at 92.04dB. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TS912ID Features
8 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail
TS912ID Applications
There are a lot of STMicroelectronics TS912ID Instrumentational OP Amps applications.
- Radar
- Car stereo
- Precision measurement
- Power generator
- Video data acquisition
- Video amplifiers
- Industrial control system
- PDA
- Active probe
- Test equipment
