banner_page

TS914ID

4 Channels 60mA per Channel 1pA 85 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS914 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-TS914ID
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 692
  • Description: 4 Channels 60mA per Channel 1pA 85 dB Instrumentational OP Amps 0.0003μA 8V 2.7V~16V ±1.35V~8V TS914 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Nominal Supply Current 1.4mA
Output Current 40mA
Slew Rate 1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 85 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.7V~16V ±1.35V~8V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 10mV
Bandwidth 800 kHz
Gain Bandwidth Product 1.4MHz
Unity Gain BW-Nom 800 kHz
Voltage Gain 92.04dB
Average Bias Current-Max (IIB) 0.0003μA
Low-Offset NO
Frequency Compensation YES
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00015μA
Max Junction Temperature (Tj) 150°C
Ambient Temperature Range High 125°C
Height 1.75mm
Length 8.75mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number TS914
Pin Count 14
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Power Supplies +-1.35/+-8/2.7/16V
Number of Channels 4
Operating Supply Current 400μA

TS914ID Overview


The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 10mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 400μA , this buffer op amp will be able to operate. Maintain 92.04dB as the voltage gain. 4 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage.

TS914ID Features


14 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail

TS914ID Applications


There are a lot of STMicroelectronics TS914ID Instrumentational OP Amps applications.

  • Medical imaging
  • Broadcasting
  • E-book readers
  • Comparator
  • Biopotential
  • Portable electronic products powered by batteries
  • Home audio systems
  • RF cable systems
  • Digital cameras
  • pH (acidity)

Write a review

Note: HTML is not translated!
    Bad           Good