TS922IDT

2 Channels 80mA per Channel 15nA 60 dB Instrumentational OP Amps 2.7V~12V TS922 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TS922IDT
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 778
Description: 2 Channels 80mA per Channel 15nA 60 dB Instrumentational OP Amps 2.7V~12V TS922 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SO
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Base Part Number	TS922
Output Type	Rail-to-Rail
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	2mA
Nominal Supply Current	3mA
Output Current	80mA
Current - Supply	2mA
Slew Rate	1.3V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	15nA
Voltage - Supply, Single/Dual (±)	2.7V~12V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	3mV
Bandwidth	4MHz
Gain Bandwidth Product	4MHz
Voltage Gain	106.02dB
Voltage - Input Offset	3mV
Current - Output / Channel	80mA
Number of Amplifiers	2
Height	1.25mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)

TS922IDT Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 2mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. This op amp contains 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. The linear amplifier consists of 2 different elements in total. To run supply current of buffer amplifier under 2mA. I would like to point out that this electrical component is capable of working from a voltage below 12V as far as the power supply is concerned. To keep the buffer amps' supply voltage higher than 2.7V. The linear amplifier has 2 amplifiers.