TS924AIDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS924 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 7mA |
| Output Current | 80mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 4MHz |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Power | NO |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS924AIDT Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 14 terminations over the past year. It consists of a total of 14 pins in total. Please take in mind that op amp should be run at 3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 14 pins. The input offset voltage is 900μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 1mA . Keeping the voltage gain at 106.02dB is the best course of action. There are 4 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier is packaged by using a TAPE AND REEL axis.
TS924AIDT Features
14 Pins
supply voltage of 3V
106.02dB voltage gain
Output Type: Rail-to-Rail
TS924AIDT Applications
There are a lot of STMicroelectronics TS924AIDT Instrumentational OP Amps applications.
- Laptop
- Signal operation
- Weak signal detection
- Division circuits
- Portable electronic products powered by batteries
- Video computer boards
- Signal amplification
- Multimedia playback equipment
- Weighing systems
- single/dual op amp sum and difference circuits
