TS941ILT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TS941 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 1.85μA |
| Output Current | 650μA |
| Slew Rate | 0.0045V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 10 kHz |
| Unity Gain BW-Nom | 10 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS941ILT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 5 mark. Linear amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.2μA and 10 . 100dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. It is used TAPE AND REEL to pack the op amps.
TS941ILT Features
5 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail
TS941ILT Applications
There are a lot of STMicroelectronics TS941ILT Instrumentational OP Amps applications.
- Semiconductor detectors
- Ultrasound transducers
- High speed sample
- Car stereo
- Signal operation
- Fission chambers
- Exponential operation circuits
- High-frequency data acquisition systems
- High input resistance broadband
- Proportional counter tubes
