TS942AIDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS942 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 3.7μA |
| Output Current | 650μA |
| Slew Rate | 0.0045V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~10V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 10 kHz |
| Unity Gain BW-Nom | 10 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS942AIDT Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. A supply current of 1.2μA can be used to operate this linear amplifier. Voltage gain should remain at 100dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are 2 elements in total in this linear amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier.
TS942AIDT Features
8 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail
TS942AIDT Applications
There are a lot of STMicroelectronics TS942AIDT Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- pH (acidity)
- Industrial applications including automation
- Proportional operation circuits
- Scintillation detectors
- Video conversion and routing
- Fission chambers
- Gaming industry
- Home audio systems
- Division circuits
