TSC428CBA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | TSC428 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 400μA |
| Output Current | 1.5A |
| Max Supply Current | 8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSC428CBA+ Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tube represents the package.There are 2 drivers installed for this device.There is a mounting bracket in the way of Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.Temperature range 0°C~70°C TA is allowed for this device.A type of Inverting, Non-Inverting is used for input in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number TSC428.Mosfet driver is mounted using Surface Mount.Devices have 8 pins available.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.5A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.There are 8 component pins on the board.The device is capable of delivering a current of 1.5A.Based on its maximum power dissipation of 450mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 8mA to ensure greater stabilMosfet gate driversy.
TSC428CBA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 450mW
TSC428CBA+ Applications
There are a lot of Maxim Integrated TSC428CBA+ gate drivers applications.
- Pulse transformer drivers
- Isolated Supplies for Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Power factor correction (PFC) circuits
- White Goods - Air Conditioner, Washing Machine,
- DC-DC Converters
- High frequency line drivers
- Motor Drives
- RGB applications
- Telecom switch mode power supplies
