TSC428MJA/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 µs |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
TSC428MJA/883B Overview
Its 8-CDIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is indicated.A total of 2 drivers are integrated into its configuration.Gate drivers is mounted in the way of Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -55°C~125°C TA.Inverting, Non-Inverting is the input type used in this program.Mosfet driver is based on 8 terminations.In this case, Through Hole indicates how the device is mounted.The pins are configured with 8 when designing the chip.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Considering its maximum power dissipation, 640mW shows its maximum capacity to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 8mA.Gate drivers of this type are included in the Military, MIL-STD-883 series.
TSC428MJA/883B Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 640mW
Operating with the supply voltage of Military, MIL-STD-883
TSC428MJA/883B Applications
There are a lot of Maxim Integrated TSC428MJA/883B gate drivers applications.
- Isolated Gate Driver Supplies
- Smart Phones
- Portable Media Players
- Motor controllers
- DC-DC Converters
- Digitally controlled power supplies
- High-speed communications
- Uninterruptible Power Supplies (UPS)
- PCMCIA applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
