TSH72CPT

2 Channels 55mA per Channel 6μA 72 dB Instrumentational OP Amps 6V 3V~12V ±1.5V~6V TSH72 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TSH72CPT
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 803
Description: 2 Channels 55mA per Channel 6μA 72 dB Instrumentational OP Amps 6V 3V~12V ±1.5V~6V TSH72 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	TSH72
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	6V
Number of Channels	2
Operating Supply Current	9.8mA
Nominal Supply Current	21mA
Slew Rate	118V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	72 dB
Current - Input Bias	6μA
Voltage - Supply, Single/Dual (±)	3V~12V ±1.5V~6V
Output Current per Channel	55mA
Input Offset Voltage (Vos)	10mV
Bandwidth	70MHz
Gain Bandwidth Product	65MHz
Voltage Gain	84dB
Power Supply Rejection Ratio (PSRR)	75dB
Voltage - Input Offset	800μV
-3db Bandwidth	100MHz
Length	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TSH72CPT Overview

Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 10mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 9.8mA and 10 . You should keep the voltage gain at 84dB for the time being. 2 channels are available on the instrumentation amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 6V.