TSH95ID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TSH95 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 24mA |
| Output Current | 40mA |
| Slew Rate | 110V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 7V~12V ±3.5V~6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 150MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 20μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Bias Current-Max (IIB) @25C | 15μA |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSH95ID Overview
In the package, you will find a 16-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 16. In this case, there are 16 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 16 pins. In terms of input offset voltage, operational amplifier rates 4mV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 4.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain. Buffer op amp is equipped with 4 channels on the device.
TSH95ID Features
16 Pins
supply voltage of 5V
70dB voltage gain
TSH95ID Applications
There are a lot of STMicroelectronics TSH95ID Instrumentational OP Amps applications.
- Video computer boards
- Subtraction operation circuits
- Cinema or auditorium audio system
- Signal transformation
- Navigation
- Proportional operation circuits
- Precision measurement
- single/dual op amp sum and difference circuits
- MP3
- Commercial audio systems
