TSI310A-133CEY
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 304 |
| Published | 1999 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 304 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 304 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Temperature Grade | COMMERCIAL |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, PCI |
| Frequency (Max) | 133MHz |
| Data Rate | 8 Gbps |
| Data Bus Width | 64b |
| Height Seated (Max) | 1.78mm |
| Length | 31mm |
| Width | 31mm |
| Thickness | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TSI310A-133CEY Overview
The number of terminations is 304.This device should be set to 2.5V.It has a total of 304pins.In order to operate, the 304pins are used.The device must operate at a minimum working temperature of 0°Cin order to be reliable.This value enables the part to run consistently with a maximum value of [0].This interface IC operates at a voltage of 3.3V.In this device, there are BUS CONTROLLER, PCI uPs, uCs, or peripheral ICs.With the use of this device, ALSO REQUIRES 3.3V SUPPLYcan also be established.
TSI310A-133CEY Features
Set the part at 2.5V volts
BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type
TSI310A-133CEY Applications
There are a lot of Integrated Device Technology (IDT) TSI310A-133CEY Specialized Interface ICs applications.
- Medical Instrumentation
- E1 Multiplexer
- DSLAMs
- and 5 REN loads
- T1/E1 Terminals
- Industrial and process control systems
- E1 Network Equipment
- RGB switches
- SONET/SDH and PDH Multiplexers
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
